Toyota Tundra Tire Pressure Sensor Reset
Toyota Tundra Tire Pressure Sensor Reset. Turn the engine switch to the “on” position. Tire pressure reset switch on a 2008 toyota tundra?
.jpg)
Turn the engine switch to the “acc” or “lock” position. Press reset button under dash and hold it in. Only if the pressure changes.
There Should Be A Tpms Reset Button On The Underside Of The Dashboard Above Your Right Lower Leg.
Each model year has a different button location. Resetting the system allows the tundra to accurately measure the air pressure in all of the tires. Before initializing, set the tire pressure within the specified range.
Turn The Ignition Switch Off.
Connect the techstream to the dlc3. I don't think your tpms light should be activated because you rotated the tires. Relearn procedure when resetting the tire pressure or after rotating the tires (select models)
Wait For Several Minutes With The Engine Switch In The “On” Position, To Allow The System To Record Each Tire’s Pressure, Then Turn The Engine Off.
Click “set/reset” and a message saying “tire learning active” will pop up. The manual says to hold it in for a few minutes, both times with mine the. Be aware that in most cases the price of a unit is around 120€.
Find And Press The Tire Pressure Warning Reset Button And Wait For The Moment When The Light Blinks 3 Times.
Turn the engine switch to the “on” position. The warning light will turn off when the system is reset. Only if the pressure changes.
Turn The Ignition To The Off Position.
Turn the engine switch to the “on” position and wait some minutes. Disc wheel and wheel cap. The tire pressure sensor light shows up when low air pressure is detected in a tire.
Post a Comment for "Toyota Tundra Tire Pressure Sensor Reset"