How To Clean A York Furnace Flame Sensor
How To Clean A York Furnace Flame Sensor. Turn off the furnace power; Never use sandpaper as it will damage your flame sensor’s rod.
Loosen the screws and remove the flame sensor If it doesn’t, replace it. This is to get rid of the buildup on the sensor.
Once You Clean The Unit, Test.
Using the user manual, find where your furnace’s flame sensor is located. 3.) sanitize the flame sensor. Make sure you won't rub anything other than the rod.
Do Not Use Sandpaper On Any Other Component In Your Furnace.
The process of cleaning the flame sensor is easy. If you don’t have the user manual, you can find the manual for your model here: To clean the sensor, simply rub the metal rod gently with light grit sandpaper, steel wool, or emery cloth to eliminate the carbon buildup.
When I Blow Lightly In The Direction Along The Length Of The Gas.
Remove the furnace flame sensor; Turn off the gas valve; This is to get rid of the buildup on the sensor.
Test It Again To See If It Works Well Now.
This prevents rust and debris from corroding the metal surface. Turn off the furnace power; After that, use a clean and dry paper towel to get the excess particles and dust from the metal rod.
This A Simple And No Cost Fix To Your Heating Problems.
Clean the sensor with an emery cloth; Can you clean a flame sensor? It can be done anytime with tools that are easily available at your home.
Post a Comment for "How To Clean A York Furnace Flame Sensor"